To Change The Lamp; When The Appliance Is Not In Use; Something Not Working - Electrolux EUF29400 Gebrauchsanweisung

Never use a hair drier or other heating
appliances to speed up defrosting.
Excessive heat may damage the
plastic interior, and humidity could
enter the electric appliance making it
live.

To change the lamp

The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert. To prise it out of its location.
Assemble a new lamp by guiding it
into a centred position and press until
it snaps into place.

SOMETHING NOT WORKING

Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the
temperature display.
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
Use a halogen bulb of the same type,
maximum rating of 20 W.

When the appliance is not in use

Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet is to be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
Possible cause / Remedy
Please contact your local Electrolux Service
Force Centre
Switch off the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too high.
See the chapter "Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.
14