Replacing The Lamp - Electrolux EN3881AOX Benutzerinformation

16 www.electrolux.com
Problem
The temperature in
the appliance is too
high.
The temperature in
the refrigeration is
too high.
The temperature in
the freezer is too
high.
The appliance does
not operate.
The lamp does not
work.
"dEMo" appears on
the display.
The buzzer sounds. .
Upper or lower
square is shown in
the temperature dis-
play.
As much as the advice does not lead to result, call the nearest brand-mark service.

7.1 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Possible cause
The door is not closed
correctly.
The product temperature
is too high.
Many products are stored
at the same time.
There is no cold air circu-
lation in the appliance.
Products are too near to
each other.
The appliance is switched
off.
The mains plug is not con-
nected to the mains sock-
et correctly.
The appliance has no
power. There is no voltage
in the mains socket.
The lamp is in stand-by.
The appliance is in dem-
onstration mode.
The door is not closed
correctly.
An error has occurred in
measuring the tempera-
ture.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter .
Solution
Refer to "Closing the door".
Let the product tempera-
ture decrease to room tem-
perature before storage.
Store less products at the
same time.
Make sure that there is cold
air circulation in the appli-
ance.
Store products so that
there is cold air circulation.
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
Close and open the door.
Keep pressed approxi-
mately 10 sec. the Mode
button since a long sound
of buzzer is heard and the
display shut off for a short
while: appliance start works
regularly.
Refer to "Door open
alarm".
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).