Rear Spacers; Door Reversibility - AEG S74300DSM0 Benutzerinformation

6.4 Rear spacers

6.5 Door reversibility

WARNING!
Before carrying out any opera-
tions, remove the mains plug
from the power socket.
H
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the
doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
Remove the upper hinge taking care for
the upper door not to fall off and keep it
for future actions.
Remove the upper door.
Remove the upper support and install it
in the opposite side.
Unscrew the middle hinge (H). Unscrew
the plastic plugs located on the oppo-
site side of the middle hinge and intro-
duce them in the holes left free from the
removed hinge.
Remove the lower door.
ENGLISH
29