AEG S74300DSM0 Benutzerinformation Seite 30

30 www.aeg.com
Remove the ventilation grille which is
fixed by two screws.
Carefully place the appliance on its back,
totally unscrew the adjustable foot and
screw it in the opposite side.
Remove the bottom hinge by unscrew-
ing its fixing screws.
Using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the op-
posite side of the hinge.
Install the lower hinge in the opposite
side, using the screws previously re-
moved.
Carefully replace the appliance in its
working position and adjust the level of
the appliance by screwing / unscrewing
the adjustable feet at the bottom of the
cabinet using your fingers or a tool.
Slide the hole cover out of the ventila-
tion grille by pushing it in the direction
of the arrow and reassemble it on the
opposite side.
Install the ventilation grille, fixing the
screws.
Remove the plugs (1) on the upper side
A
of both doors and move them to the
other side.
Remove the handle. Unscrew the top
h1 h2 h3
handle bracket from the handle rod (h1).
Unscrew the bottom handle bracket
from the door (h2).
Unscrew the top handle bracket from the
door (h3).
Install the plug (1).