Noises - AEG S74300DSM0 Benutzerinformation

h4
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.

7. NOISES

There are some sounds during normal
running (compressor, refrigerant circula-
tion).
OK
h5 h6
Install the handle in the opposite side.
Re-screw the handle bracket on the door
(h4). Turn the handle bracket with the
handle and screw them to the door (h5)
and the fitted handle bracket (h6).
Install the lower door.
Install the middle hinge (H) on the oppo-
site side.
Install the upper door.
In your documentation bag you will find
the upper hinge necessary to make the
reversibility. Put the hinge in position
and screw it.
Make sure that the front board of the
door is parallel to the front board of the
top.
Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will car-
ry out the reversibility of the doors at
your cost.
HISSS!
ENGLISH
31
BRRR!