Herunterladen Inhalt Inhalt Diese Seite drucken

Equaliser; Switching Off The Unit; Specifications - IMG STAGE LINE 38.7030 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4.8 Equaliser

For sound adjustment, it is possible to
select 8 presettings or to save a user-
defined sound setting.
1) Press the button MENU.
2) Select the following:
System settings
3) The current setting is indicated by an
asterisk
*
. Beneath the line
additional presettings are available:
Classic
Pop
News
My EQ
My EQ profile setup
Turn the knob CONTROL SELECT to
select the sound adjustment and then
press the knob to activate it.
4) For a user-defined adjustment, select
My EQ profile setup
the line
call up the following menu:
5) Select the line
Bass
knob CONTROL SELECT. A submenu
with an adjustment scale will appear:
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
22
6) Turn the knob CONTROL SELECT to
Equaliser
7) Adjust the high frequencies accordingly.
8) In the line
Movie
,
9) When the sound has been adjusted as
>
10) The menu with the sound presettings
and

4.9 Switching off the unit

When the unit is switched off with the but-
ton STAND BY (or
trol), the display will continue to show the
date and the time. Use the same buttons to
and then press the
switch the unit on again.
pletely switch off the unit.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
adjust the sound and then press the
knob to return to the previous menu.
Loudness
, press the knob
CONTROL SELECT to activate or deac-
tivate the aurally compensated sound
correction (boosting of the high frequen-
cies and low frequencies when the vol-
ume is low).
desired, press the button BACK. The
unit will ask:
Save changes?
YES
Confirm with
(preset).
will appear again (fig. 49). For the user-
defined sound adjustment to take effect,
My EQ
select the line
and confirm. The
menu "System settings" will appear, and
shortly afterwards the current operating
mode will be indicated again.
on the remote con-
Use the mains switch POWER to com-

5 Specifications

Reception frequencies
FM: . . . . . . . . . . . . . 87.5 – 108 MHz
DAB(+): . . . . . . . . . 174.928 MHz to
239.200 MHz
Audio input AUX: . . . 1.2 V,
3.5 mm jack
Outputs
Line: . . . . . . . . . . . . 750 mV, RCA
Headphones: . . . . . 1 V, 3.5 mm jack
Audio formats
supported: . . . . . . . . . MP3, WMA,
WAVE, AAC, FLAC
Menu languages: . . . English, French,
German, Italian,
Spanish
Power supply
Mains voltage: . . . . 230 V~ / 50 Hz
Power consumption: 20 VA max.
DC power supply
(alternative): . . . . . . 15 – 25 V
300 mA at 15 V
Battery for
remote control: . . . . 3 V, 1 × CR 2025
Dimensions : . . . . . . . 482 × 44 × 245 mm
Weight : . . . . . . . . . . 2.7 kg
Subject to technical modification.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wap-200

Inhaltsverzeichnis