Dab Radio; Fm Radio - IMG STAGE LINE 38.7030 Bedienungsanleitung

4.2 DAB radio

1) Press the button MODE repeatedly until
DAB radio
appears. When the digital
radio is switched on for the first time, the
station scan will automatically be started
to find the stations in your reception
range:
Then, a list with the stations found will
appear:
2) To select a station, turn the knob CON-
TROL SELECT and then press the knob
to confirm.
With the remote control: Select the
station with the button L or M and call it
up with the button ENTER.
The display will show the station and
information with regard to the pro-
gramme and / or with regard to the music
title currently played. Press the button
INFO (repeatedly) to show more infor-
mation. The icons in the lower line have
the following meaning:
stereo replay
indication of the signal strength
received
no connection to the Internet
3) To switch to a different station, proceed
as described in step 2.
4) To perform a new station scan (e. g.
because new stations are available or
because the reception antenna has
been realigned), press the button
Scan
MENU, select the line
the knob CONTROL SELECT.
All DAB channels can also be manu-
ally selected via the menu line
tune
. To return from the manual selec-
tion of DAB channels to the station list,
press the button MENU repeatedly until
the menu "DAB" appears. Then select
Station list
the line
knob CONTROL SELECT to call up the
list.
5) Ten stations can be stored on the ten
storage locations: Keep the button PRE-
SET pressed until the menu "Save to
Preset" appears (fig. 34). Turn the knob
CONTROL SELECT to
unused location and then press the
knob.
Once the station has been stored, the
display will show information with regard
to the station stored. In the lower line,
the storage location number will be pre-
ceded by "P".
To store stations with the remote con-
trol, keep the button PRESET pressed
until the menu "Save to Preset" appears.
Select an unused storage location with
the button L or M and then store the
station with the button ENTER.
6) To call up a station stored, briefly press
the button PRESET. Select the station
with the knob CONTROL SELECT and
then press the knob to confirm. To call
up a stored station by means of the
remote control, press one of the buttons
1 – 5; for the storage locations 6 – 10,
first press the button SHIFT and then
one of the buttons 1 – 5.
7) Stations that currently do not broadcast
signals, can be removed from the sta-
tion list: Press the button MENU, select
the line
the knob CONTROL SELECT. In the fol-
lowing confirmation prompt, select
8) To define the order of the stations in the
stations list: Press the button MENU, se-
lect the line
firm. The following options are available:
Alphanumeric
sorted alphanumerically.
Ensemble
by channels; multiple stations are
received for each channel.
Valid
rently broadcast signals are listed in
alphanumeric order. Then, the sta-
tions that currently do not broadcast
signals are listed.
The asterisk
setting. Turn the knob CONTROL
SELECT to select the sorting desired
and then press the knob to activate it.
and press
9) For some programmes, the dynamics of
the audio signal can be compressed:
The volume of quiet sounds will be
Manual
increased and loud sounds will be atten-
uated (ideally suited for background
music, for example).
Press the button MENU, select the
DRC
line
and press the
press the knob CONTROL SELECT.
The following options are available:
DRC high
DRC low
DRC off
The asterisk
select an setting. Turn the knob CONTROL
Prune invalid
and press
YES
Station order
and con-
= All stations are
= The stations are sorted
= First, the stations that cur-
*
will indicate the current
(dynamic range control) and
= high level of compression
= low level of compression
= no compression
* will indicate the current
SELECT to select the compression
desired and then press the knob to acti-
vate it.
Note: The DRC setting will have no effect on
the audio signal when no data for compression
are sent along with the programme.

4.3 FM radio

1) Press the button MODE repeatedly until
FM radio
appears. Then, the operat-
ing mode indication "FM" will appear:
2) When the FM radio is switched on for
the first time, all stations must first be
scanned and stored. To start the station
scan, press the knob CONTROL SE-
LECT. The scan will start at the recep-
tion frequency 87.5 MHz and will stop at
the first station.
3) If required, turn the knob CONTROL
SELECT for a fine adjustment of the re-
ception frequency in 50 kHz increments.
4) If the station broadcasts RDS informa-
tion (Radio Data System), R•D•S will
appear in the lower display line. The sta-
tion name will be shown and, if applica-
ble, information with regard to the sta-
tion and / or with regard to the current
.
music title. Press the button INFO
(repeatedly) to show more information.
The icons in the lower line have the fol-
lowing meaning:
stereo replay
indication of the signal strength
received
no connection to the Internet
5) To store the station, keep the button
PRESET pressed until the menu "Save
to Preset" appears. Turn the knob CON-
TROL SELECT to select an unused
storage location and then press the
knob.
Once the station has been stored, the
display will show information with regard
to the station stored. In the lower line,
the storage location number will be pre-
ceded by "P".
To store stations with the remote con-
trol, keep the button PRESET pressed
until the menu "Save to Preset" appears.
Select an unused storage location with
the button L or M and then store the
station with the button ENTER.
6) To call up a station stored, briefly press
the button PRESET. Select the station
19