Function Overview; Creating And Replaying A Playlist; Replay From A Different Audio Unit (Aux Input); Sleep Timer Function - IMG STAGE LINE 38.7030 Bedienungsanleitung

➞ Scroll to "UPnP Device Host" and
"Windows Media Player". Set the
startup type to "Automatic" as well.
➞ Close all open windows.
C – Making the audio files available
Copy the audio files desired to the folder
"Libraries"/ "Music" so that the Windows
Media Player can make the audio files
available to the local network (and thus
to the WAP-200).
3) For replay via the WAP-200, use the line
Shared media
in the menu "Music
player" (fig. 40) to select the computer
and the audio files.

4.4.3 Function overview

Button Function
to show various types of infor-
INFO  
mation with regard to the track
REPEAT   to replay the playlist repeatedly
to replay the tracks in
SHUFFLE  
random order
PLAY   to pause / continue the replay
 to go to the previous / next track
I / I
◀ ◀ ▶ ▶
 fast reverse / fast forward
/
◀ ◀ ▶ ▶
press briefly:
to go to the previous / next track
PREV

NEXT
keep pressed:
fast reverse / fast forward
Functions of the music player

4.4.4 Creating and replaying a playlist

To replay tracks from different folders, a
playlist with up to 500 tracks can be cre-
ated. It is possible to mix tracks from a
computer connected to the local network
and from a data storage device connected
to the USB port .
Note: The playlist will be deleted when the unit is
switched off with the mains switch POWER, but will
remain available when the unit is switched to the
stand-by mode with the button STANDBY or
1) While a track is being replayed or when
the track is selected in the track
overview (fig. 42), keep the knob CON-
TROL SELECT pressed until the mes-
sage
Added to My playlist
appears. Proceed in the same way to
add the other tracks desired to the list.
2) To replay the playlist, press the button
MENU (the menu shown in fig. 40 will
appear) and use the line
list to call up the list. The first track
will be selected. Press the knob CON-
TROL SELECT to start the replay or first
select a different track to start with.
3) To replay the playlist repeatedly, press
the button REPEAT.
4) To remove a track from the list, select
the track in the list and keep the knob
CONTROL SELECT pressed until the
confirmation prompt
Delete from my Playlist?
appears. Confirm with
NO
with .
5) To delete the entire playlist (as an alter-
native to switching off the unit with the
mains switch):
Press the button MENU and then delete
the list via the line
list and a confirmation prompt.
4.5 Replay from a different
audio unit (AUX INPUT)
An audio unit with line output (e. g. CD
player or MP3 player) can be connected to
the 3.5 mm jack AUX INPUT on the front
side. Thus, the audio unit can be replayed
via the WAP-200.
Press the button MODE repeatedly
Aux in
until
mode indication "Auxiliary Input" will
appear:

4.6 Sleep timer function

The unit can automatically switch off after a
specific time so that the listener can fall
asleep to music, for example.
1) Press the button SLEEP (at the unit or
on the remote control) repeatedly until
the time desired is shown:
Sleep OFF, 15, 30, 45, 60 minutes
.
2) The previous display will appear after
2 seconds if the button is not pressed. In
the lower line, the time until switch-off
will be indicated after the clock icon.
3) After switch-off, the unit can be switched
on again with the button STAND BY (or
on the remote control).
4) The sleep timer function can also be set
via the menu:
a) Press the button MENU.
b) Call up the following:
My play-
➞ Main menu
c) Turn the knob CONTROL SELECT to
set the time and then press the knob
to confirm.
YES
or cancel
Clear My play-
appears. Then, the operating
➞ Sleep

4.7 Alarm

The unit can switch on at a specific time.
For this, two different alarm times can be
set.
1) Press the button ALARM. The menu
"Alarms" will appear:
2) Turn the knob CONTROL SELECT to
select the alarm 1 or 2 and then press
the knob to call up the alarm time menu:
3) Select one after the other:
Enable: Off, Daily, Once, Weekends or
Weekdays
Time: 00:00 – 12:59 AM / PM or
00:00 – 23:59
Mode: Buzzer, Internet radio, DAB,
FM
Preset: Last listened or 1 – 10
Volume: Muted, 1 – 32
4) To save the settings and activate the
Save
alarm, select the line
Volume
) and then press the knob CON-
TROL SELECT. The menu "Alarms" will
appear again and shortly afterwards the
operating mode will be indicated. In the
lower line, an alarm clock icon will be
shown.
5) When the unit has been switched off
with the button STAND BY (or
remote control), it will switch on at the
alarm time. The unit can be switched off
with the button SLEEP so that the alarm
will sound again after 5 minutes. To
change the alarm interval, repeatedly
press the button SLEEP: 5, 10, 15 or 30
minutes.
To completely switch off the alarm,
press the button ALARM.
6) In the standby mode, use the button
ALARM to switch off the alarm function
or, if two alarm times have been defined,
to switch between the alarm times.
(beneath
on the
21