Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 Operation
1) Press the button MODE (at the unit or on
the remote control) repeatedly until the
display shows the operating mode
desired:
Internet radio
Music player
DAB radio
FM radio
Aux in
2) Use the control MAIN VOLUME at the
unit or the buttons VOLUME on the re-
mote control to set the volume: Muted,
1 – 32.
3) To mute the sound, press the button
MUTE. To unmute the sound, press the
button MUTE again.
4) For information on how to set the sound,
see chapter 4.8 (Equaliser).
4.1 Internet radio
The Internet radio can only be used when
the network settings have been made
(
chapter 3.3 or 3.4).
1) Press the button MODE repeatedly until
Internet radio
the menu for establishing the network
connection will appear:
Once the connection to the Internet has
been established, the following mes-
sage will appear:
Then, the station most recently listened
to will be shown or, when the Internet
radio is switched on for the first time, the
menu "Internet radio" will appear:
2) Turn the knob CONTROL SELECT to
Station list
select the line
then press the knob to call up the selec-
tion menu:
3) There are several options to select a
station, e. g.:
18
➞
Stations
ons
or, for example:
➞
Stations
Bahamas
When a wrong selection has been
made, the button BACK can be used
any time to return to the previous menu.
4) To scan (search) for a specific station,
select the following:
➞
Stations
The menu for entering the name will
appear:
Turn the knob CONTROL SELECT to
select the first character and then press
the knob to confirm. Proceed in the
same way to enter the other characters.
Then select the field
between
is shown. Then,
knob.
BKSP
CANCEL
5) When a station has been found, the dis-
play will show the station and informa-
tion with regard to the programme and /
or with regard to the music title currently
played:
Press the button INFO (repeatedly) to
show more information. The icon in the
lower right corner will indicate the data
stream. The icon will be crossed out
when the connection to the station is
interrupted.
6) Ten stations can be stored on the ten
storage locations: Keep the button PRE-
SET pressed until the menu "Save to
Preset" appears. Turn the knob CON-
TROL SELECT to select an unused
storage location and then press the
knob.
and
Once the station has been stored, the
display will show information with regard
to the station stored. In the lower line,
the storage location number will be pre-
ceded by "P".
To store stations with the remote con-
trol, keep the button PRESET pressed
➞
Genre
➞
Blues
➞
All Stati-
➞
... (station name)
➞
Location
➞
Caribbean
➞
Reggae
➞
... (station name)
➞
Search stations
OK
(to be found
Z
BKSP
and
) and press the
= delete last character
= return to the previous menu
until the menu "Save to Preset" appears.
Select an unused storage location with
the button L or M and then store the
station with the button ENTER.
➞
7) To call up a station stored, briefly press
the button PRESET. Select the station
with the knob CONTROL SELECT and
then press the knob to confirm. To call
up a stored station by means of the
remote control, press one of the buttons
1 – 5; for the storage locations 6 – 10,
first press the button SHIFT and then
one of the buttons 1 – 5.
8) To save a station to the list "My
Favourites" (see menu line in fig. 26),
keep the knob CONTROL SELECT
pressed until the message
Favourite addet
9) To change to another station of the
current selection menu, turn the knob
CONTROL SELECT and then press the
knob to confirm.
With the remote remote control:
Select the station with the button L or M
and call it up with the button ENTER.
To carry out an entirely new station
scan, press the button MENU. The
menu "Internet radio" (fig. 25) will
appear. Use this menu to start a new
station scan.
4.1.1 Free-of-charge registration in the
radio portal FRONTIER SILICON
This portal allows you to create and organ-
ise various lists of your stations, to use
additional functions and to listen to Internet
radio via your computer. Once the WAP-
200 is connected to the Internet, your lists
will be accessible via the WAP-200.
1) For registration, the following data is
required:
– your e-mail address
– a password
– the radio model: Jupiter 6.2
– the access code
The access code can be found in the
WAP-200:
In the mode "Internet radio", press
the button MENU and select the fol-
lowing:
➞
➞
Station list
code:
2) On the Internet, go to the following ad -
dress:
www.wifiradio-frontier.com
and register a new account.
3) Additional radios can be registered via
your account via:
➞
My preferences
➞
Add another Wi-Fi radio to the account
Thus, all your Internet radios will have
access to the same station lists.
appears.
➞
Help
Get access
Werbung
Kapitel
Inhaltsverzeichnis
