Noise/Vibration Information; Technical Data - Bosch PBH 2800 RE Bedienungsanleitung

19 Securing screw for key type drill chuck*
20 Key type drill chuck*
21 SDS-plus adapter shank for drill chuck*
22 Keyless chuck (PBH 2900 FRE/
PBH 3000 FRE Set)
23 Drill chuck mounting (PBH 3000-2 FRE)
24 Front sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
25 Rear sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
26 Extraction sleeve of the dust extraction attachment*
27 Clamping screw for the dust extraction attachment*
28 Depth stop of the dust extraction attachment*
29 Telescopic pipe of the dust extraction attachment*
30 Wing bolt of the dust extraction attachment*
31 Guide pipe of the dust extraction attachment*
32 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not
included as standard delivery.

Technical Data

Rotary Hammer PBH ...
Article number
Speed preselection
Stop rotation
Right/left rotation
Quick change chuck
Delivery Scope
– Keyless drill chuck
Rated power input
Impact frequency at rated speed
Impact energy per stroke
Rated speed
No-load speed
– 1st gear
– 2nd gear
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
18 | English

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 89 dB(A); Sound power
level 100 dB(A). Uncertainty K=2 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Hammer drilling into concrete: Vibration emission value
a
Chiselling: Vibration emission value a
Uncertainty K=1.5 m/s
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
2800 RE
3 603 C93 0..
–
–
W 720
bpm 4000
J 0–2.6
rpm 1100
rpm 0–1450
rpm –
SDS-plus
mm 43 (Euro-Norm) 43 (Euro-Norm) 43 (Euro-Norm) 43 (Euro-Norm)
mm 26
mm 68
mm 13
mm 30
kg 3.0
/ II
2
=14 m/s , Uncertainty K=1.5 m/s
h
2
The vibration emission level given in
WARNING
this information sheet has been meas-
2900 FRE 3000 FRE Set
3 603 C93 1.. 3 603 C93 2..
–
730
4000
0–2.7
1100
0–1450
–
SDS-plus
26
68
13
30
3.0
/ II
2
,
=12 m/s
h
.
3000-2 FRE
3 603 C94 2..
–
750
4000
0–2.8
1100
0–1450 0–1450
– 0–3000
SDS-plus SDS-plus
26
68
13
30
3.0
/ II
1 619 929 781 • 23.4.07
2
,
750
4000
0–2.8
1100
26
68
13
30
3.3
/ II