Noise/Vibration Information; Declaration Of Conformity - Bosch PSB 6200 RE Originalbetriebsanleitung

OBJ_BUCH-911-007.book Page 17 Monday, April 29, 2013 12:21 PM

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according
h
to EN 60745:
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving without impact:
a
h
K
Tapping:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
Bosch Power Tools
PSB 650 RE
PSB 6500 RE
PSB 6200 RE
PSB 650 RA
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
29.05.2012
Assembly
 Before any work on the machine itself, pull the mains
plug.
Dust Extraction (PSB 650 RA/ PSB 750 RCA)
(see figures A F)
–
 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system
suitable for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
English | 17
PSB 750 RCE
PSB 7500 RCE
PSB 750 RCA
97 100
108 111
3 3
4.5 5,0
1.5 1,5
35 35
3.5 4.5
<2.5 <2.5
1.5 1.5
<2.5 <2.5
1.5 1.5
2 609 007 030 | (29.4.13)