Layout And Items Supplied; Intended Use - FLORABEST FGP 1000 A1 Originalbetriebsanleitung

•
The operator is responsible for com-
plying with local safety and installation
regulations (ask an electrician if you are
in any doubt).
•
The user is required to take suitable
measures (e.g. installing an alarm sys-
tem or a reserve pump, etc.) to prevent
damage arising as a result of flooded
rooms in the event of faults with the
pump.
•
In the event of a failure of the pump, re-
pair work may only be carried out by an
electrician or by ISC after-sales service
personnel.
•
Use only original spare parts.
•
The pump must never run dry or be used
when the intake line is fully closed. The
manufacturer's warranty does not cover
damage caused to the pump as a result
of running it dry.
•
The pump must not be used to operate
swimming pools.
•
The pump must not be installed in the
drinking water pipeline.
•
The maximum temperature of the fluid
must not exceed +35°C.
•
Do not use this equipment to pump in-
flammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acid,
alkali, silo seepage, etc.) and liquids
with abrasive (emerizing) substances
(sand) must likewise be avoided.

3. Layout and items supplied

3.1 Layout (Fig. 1)
1. Garden pump
2. On/Off switch
3. Mounting holes
4. Water drain screw
5. Suction connector
6. Water filler screw
7. Pressure connector
8. Carry handle
9. Screw (2x)
Anleitung_LB4_4171183.indb 7
GB
3.2 Items supplied
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces
(if present).
•
Check to see if all the items are sup-
plied.
•
Inspect the equipment and accessories
for damage in transit.
•
If possible, keep the packaging until the
end of the guarantee period.
Important
The equipment and packaging material
are not toys! Do not let children play
with plastic bags, plastic sheets and
small parts! There is a risk of choking
and suffocating!
•
Garden pump
•
Carry handle
•
Screw (2x)
•
Original operating instructions

4. Intended use

Range of applications
•
For irrigating and watering landscaped
areas, vegetable beds and gardens.
•
For operating lawn sprinklers.
•
With preliminary filter for drawing water
from ponds, streams, rainwater butts,
rainwater cisterns and wells.
Pumping media
For the pumping of clear water (freshwater),
rainwater and mild suds/ service water.
•
The maximum temperature of the fluid
must not exceed +35°C.
•
Do not use this equipment to pump in-
flammable, gassing or explosive fluids.
•
The pumping of aggressive liquids (acid,
alkali, silo seepage, etc.) and liquids
with abrasive (emerizing) substances
(sand) must likewise be avoided.
- 7 -
16.09.11 10:06