Connecting The Hoses; Filling The Pump; Checks Before Initional Operation; Switching On And Off - FLORABEST FGPS 1100 C3 Originalbetriebsanleitung

G B M T

Connecting the hoses

- On the suction side, attach a
- On the suction side, do not use
any quick-action connection sys-
tems.
- Do not use the suction hose as a
pressure pipeline.
1. Remove the cover caps (1/3)
2. Unless already mounted, screw
15
tion (16) onto the suction hose
(14). Both piecese marked with
a .
B
3. First, screw the adapter piece
(11) with water inlet (2) onto the
device. Both pieces marked with
an .
A
4. Next, screw the suction hose
connection water inlet (13) with
the sealing ring (12) onto the
adapter piece (11). Both pieces
marked with an
5. Fit a pressure hose to the water
4
Air in the suction hose will stop the

Filling the pump

you start using it. Caution: Avoid dry run-
Never touch an overheated pump! There is
2 0
-
-
. Fit the wa-
A
When switching on the pump, ensure that
the pump and suction hose are completely
ages the device.
1
garden pump.
2
Checks before initional
operation
• Check that the electrical connec-
tion is 230 V~ / 50 Hz.
trical plug socket and make sure
• Make sure that moisture or water
never come in contact with the
mains connection. There is a risk
• Control the suction hose. The end
in water.
• Control the suction hose. The end
let position.
The device is not suitable to be con-
nected to a drinking water supply
system.

Switching ON and OFF

1. Connect the power cable (
power supply.
2. Switching On:
position "I
3. Switching Off:
In position "0"
-
9) on the
9).
1
6) to the
5) In
( 5)
-
-