Control Panel - Electrolux MGV6100 Benutzerinformation

22

Control panel

1 On/off button
2 Programme selection buttons
3
Delay start button
4 Indicator lights
5 Function buttons
1)
Salt
Multitab
End-of-programme
1) When the salt container is empty, the related indicator light does not come on while a washing
programme operates.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press a programme button,
the related indicator light comes on. Refer to
'Washing programmes' chapter for more da-
ta about the washing programmes.
Delay start button
Use the delay start button to delay the start
of the washing programme with an interval of
3, 6 or 9 hours. Refer to the chapter 'Setting
and starting a washing programme'.
1
A B
Indicator lights
Comes on when it is necessary to fill the salt container.
Refer to the chapter 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can con-
tinue to stay on for some hours. This does not have an
unwanted effect on the operation of the appliance.
Comes on when you activate the multitab function. Refer
to the chapter 'Multitab function'.
Comes on when the washing programme is completed.
Auxiliary functions:
• Level of the water softener.
• Activation/deactivation of the audible signals.
• Activation/deactivation of the rinse aid dispenser.
• An alarm if the appliance has a malfunction.
2
C D E
5
Function buttons
Use the function buttons for these opera-
tions:
• To set the water softener. Refer to the
chapter 'Setting the water softener'.
• To deactivate/activate the audible signals.
Refer to the section 'Audible signals'.
• To activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab func-
tion'.
• To deactivate/activate the rinse aid dis-
penser when multitab function is active.
Refer to the chapter 'Multitab function'.
4
3