Küppersbusch IKE458-5-4T Benutzerinformation Seite 31

• Drill the small doors as shown in the figure.
4 Top right-hand front panel
5 Top left-hand front panel
6 Bottom right-hand front panel
7 Bottom left-hand front panel
• Fix the bracket to the door with the
screws contained in the bag.
• Refit the bracket on the adjustment
screws and screw the nuts with washers
without tightening them down.
• Close the door and check that the small
door is positioned at the required height,
operating the adjustment screws if neces-
sary.
• Use the same screws for vertical align-
ment of the small doors.
• If necessary, carry our horizontal align-
ment by shifting the small doors.
• After aligning the doors, tighten the nuts
of the brackets and the screws of the
small bracket.
31