Küppersbusch IKE458-5-4T Benutzerinformation Seite 30

30
1
3
15
820
15
280
1 Rear edge
2 Front edge
3 Right hand side panel
• Apply spacers to the hinges before instal-
ling the appliance into the cabinet . See
picture.
• Rest the panels against the appliance.
2
17,5
1015
64
539
260*
541
30
• Fit the rear brackets, taking into account
the thickness of the panels (maximum
width of unit 900 mm).
• For a correct alignment make sure that
the distance between the appliance and
the cabinet is of 45 mm.
• Secure the panels at the front.
• Fix the squares (contained in the bag) to
the lower part of the door (references al-
ready provided).
• If necessary, door opening agle max 90°
can be obtained by introducing the pivots
supplied separately. See picture.
Fitting the door panels
• Open a door a remove the bracket cover.
Undo the nuts with washers and remove
the bracket from the door.