Küppersbusch IKE458-5-4T Benutzerinformation Seite 22

22
compartment flashes on the Temperature in-
dicator .
If the power has been off for a long time, fro-
zen food should be consumed as quickly as
possible, or cooked and then re-frozen.
Fast Freezing function
You can activate the Fast Freezing function
by pressing the Fast Freezing switch.
The Fast Freezing light will light up.
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. Supercool light
7. Supercool switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
The fridge is shut off by pressing the ON/
OFF switch until the Pilot light and the Tem-
perature indicator switched off.
Temperature regulation
The temperature can be adjusted between
+2°C and +8°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator. To set a warmer tempera-
ture, press warmest Temperature regulator.
To set a colder temperature, press coldest
Temperature regulator. The Temperature in-
dicator displays the newly selected temper-
ature for a few seconds and then shows
again the inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
When this function is on, SP is shown on
the display .
Important! This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing Fast Freezing switch.
The Fast Freezing light will switch off.
Fridge Control panel
1 2
Caution! During the stability period by
the first starting the temperature
displayed can not correspond to the
setting temperature. During this time it
is possible that the temperature
displayed is lower than the setting
temperature.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature inside the
fridge.
Important! Difference between the
temperature displayed and temperature
setting is normal. Especially when:
• a new setting has recently been selected.
• the door has been left open for a long time.
• warm food has been placed in the com-
partment.
Supercool function
The maximum performance is obtained by
setting the Supercool function. It's recom-
mended when loading large quantities of
food.
You can activate the Supercool function by
pressing the Supercool switch.
The Supercool light will light up.
Important! The internal temperature goes
down to +2°C.
After about 6 hours the Supercool function
switches off automatically.
3 4 5 6 7