Küppersbusch IKE2360-1 Benutzerinformation Seite 32

32
Ha
Hc
14. Open the appliance door and the
kitchen furniture door at an angle of
90°.
15. Insert the small square (Hb) into guide
(Ha).
16. Put together the appliance door and the
furniture door and mark the holes.
8 mm
Hb
17. Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be fitted
(K).
18. Place the small square on the guide
19. Align the kitchen furniture door and the
Ha
20. Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
• The door opens and closes correctly.
8 mm
K
again and fix it with the screws
supplied.
appliance door by adjusting the part
(Hb).
Hb
Hb
Hd
cabinet.
Ha