Closing The Door; Replacing The Lamp; Installation; Ventilation Requirements - Küppersbusch IKE1780-0E Benutzerinformation

30
Problem
If the advice does not lead to
the desired result, call the
nearest brand-mark service.

Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your After Sales
Service.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Possible cause
Many food products are stor-
ed at the same time.
The door has been opened
often.
The Shopping function is
switched on.
There is no cold air circula-
tion in the appliance.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the After Sales
Service.

Ventilation requirements

The airflow behind the appliance must be
sufficient.
Solution
Store less food products at
the same time.
Open the door only if neces-
sary.
Refer to "Shopping function".
Make sure that there is cold
air circulation in the appli-
ance.
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation
can only be guaranteed within
the specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Service Centre