Electrolux EWF1440 Gebrauchsanweisung Seite 98

5. Select the desired programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear
in the display.
The display will show the "End cycle time" of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The
START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate
the "End cycle" relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
STOP
Cottons
Cottons Economy
Synthetics
Gentle spin Delicates
Handwash
Spin
Drain Wool
Rinses Silk
MINI 30
6. Select the temperature
Press the TEMP. °C button if you wish to select a
temperature value different from the one proposed
by the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row
appears the indication of the selected temperature.
COTTON 08.30
MAX 90°C 10.55
40°C 1400
Exit
Temp. ° C T/Min. Options Change
COTTON 08.30
Washing 12.00
40°C 1200
° T/Min. Exit
Temp. C Options Change
98
7. Select the Spin Speed, the Rinse Hold
or Night cycle
Press the SPIN button repeatedly, in order to select
the desired spin speed or No Spin «0» or the Rinse
Hold or the Night Cycle
relevant message will appear on the second row of
the display. The selected spin level will be shown on
the third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme
with the water still in the tub.
COTTON 08.30
MAX 1400 10.55
40°C 1200
° T/Min. Options Change Exit
Temp. C
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during
the selection phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
9. Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Delay Start
No 10.55
° T/Min. Options Change Exit
Temp. C
.
options. The
Delay Start
Start in 30 min 11.25
° T/Min. Options Change Exit
Temp. C