8 electrolux
2. Fill the rinse aid dispenser (G) with rinse
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing programme.
4. Put the cap on again and turn it clock-
wise until it locks. Make sure that the
signs on the cap and on the dispenser
are aligned.
LOADING CUTLERY AND DISHES
HINTS AND TIPS
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
ADJUST THE RINSE AID DOSAGE
F
Factory set: position 4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector (H) to increase or
decrease the dosage.
G
• Put hollow items (cups, glasses and
• Make sure that water does not collect in
• Make sure that cutlery and dishes do not
• Make sure that the glasses do not touch
pans) with the opening down.
containers or in bowls.
bond together.
other glasses.
H