Hendi PROFI LINE Gebrauchsanweisung Seite 25

ASSEMBLY GUIDANCE
Tool Name: T10 screw tool
1) Adjust the grinding setting knob to position "3", then take off the 4 screws to
disassemble the normal bean container group
If the normal bean container group still has coffee beans inside, please use
up the coffee beans before disassembly.
2) Take out the large capacity bean container from the carton, adjust the grinding
setting knob to position "3", then put it onto the coffee machine and fix the 4 screws
If the screw fell into the bean container, please take out the screw immediately
to avoid the damage of grinder
Important reminder:
Please make sure the grinding setting knob can easily adjust to 5 settings after
assembly, if not, please reassemble it.
EN
25