TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
Install the charging plate
The internal slide is loose
and tighten the screws
outlet blocked
Check and clean the outlet
Pump not
working
Choose the right viscosity
grease.
grease viscosity is too high
1~2# in Winter, 2# in
Spring and Autumn,
2~3# in Summer.
1. Adjust the internal slide
1. The internal slide is not
position.
The oil output is
in the right place
2. Make sure the air supply
abnormal
2. Intake air pressure is
is normal and adjust the
often abnormal
pressure valve
Check the seal ring for wear
Grease leaks out
Replace the seal ring
- 8 -