VEVOR FF-23A Bedienungsanleitung Seite 8

Step5：Connect the hose to the oil pump inlet and the oil gun to the other
end of the hose.Access the air source and adjust the intake pressure
through the pressure valve.
Note:Wrap a few loops of raw material around the joint as needed.
MAINTENANCE
1. The air entering the pump needs to be filtered to avoid damage to
the pump.
2. When using the hose, avoid excessive bending and overloading of
the hose, as this can lead to damage.
3. After using the product, please disconnect the gas source, and
then clean the gun.
grease
4. Do not overload or idle the pump to avoid damage
5. If the product is not used for a long time, please clean it
thoroughly.
- 7 -