Werbung
SPECIFICATIONS
Type
Copy system
Originals
Original sizes
Copy sizes
Coying speed
Continuous copy
First-copy time
Copy ratio
Exposure system
Warm-up time
Copy paper feed
Fusing system
Developer system
Light source
Power supply
Power consumption
Overall dimensions
Weight
Copier dimensions
Operating conditions
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviation from these values
in individual units.
SF 2218 NON EU GB+D.p65
Desktop
Dry, electrostatic transfer
Sheets, bound documents
Max. A3
Max. A3, Min. A6, Image void: Max. 4 mm (leading and trailing edges)
18 copies/min.
Max. 99 copies; subtractive counter
5.3 sec. (except in power save modes)
Variable: 50% to 200%, in 1% increments (total 151 steps)
Fixed preset: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
Moving optical source, slit exposure (stationary platen) with automatic
exposure function
Approx. 35 sec.
One paper tray with automatic feed (250 sheets) one manual bypass
Heat rollers
Magnetic brush development
Halogen lamp
Local voltage ±10% (For this copier's power supply requirements, see the
name plate located on the right hand side of the copier, below the bypass tray.)
Max. 1.5 kW
935 mm (W) x 595 mm (D) (with exit tray)
Approx. 42,5 kg (with document cover)
600 (W) x 595 (D) x 365 (H) (mm)
Temperature: 15 °C to 30 °C, Humidity: 20% to 85%
29
3 – 29
27/08/99, 08:38
Werbung
Kapitel
