9. The charger is not intended for use by young children
without adult supervision.
10. Intended for use with original power adapters only.
11. Do not use batteries with their + (positive) and -
(negative) ends (terminals) reversed.
12. Batteries can become hot during the charging process.
5. Charger overview. Main controls.
MODE – selects charger operation mode: charge,
discharge, refresh, test (capacity), quick test (internal
resistance). To change the working mode for all 4 slots, this
button needs to be pressed for more than two seconds to
activate. When SLOT button is pressed prior to MODE, the
change will occur only within the selected charging slot.
DISPLAY – switches between various information:
charging/discharging currents, elapsed time, cell's voltage,
capacity.
CURRENT – selects charging/discharging current for
inserted batteries. Button works for the first six seconds
after inserting batteries. Can be also used after pressing
MODE button.
SLOT – selects the desired slot(s) for different working
mode, charging current, or for different parameter display.
6