Maximum Speed - JVC KW-NX7000 Bedienungsanleitung

• The route calculated by the System is one of the
possible routes to your destination. The route is not
always the most appropriate one.
• If no-exit roads (only entering the roundabout from
the roads is allowed) exist on the roundabout, the no-
exit roads can neither be shown in the route guidance
on the display nor counted in the route guidance
voice message.
• The following phenomena may occur even if the
System is working correctly...
– It may guide to a closed road or to a route
requiring U-turn.
– It may not guide to your destination if there
is only a narrow road or no road to your
destination.
– It may not avoid a congestion even if <Bypass
Traffic> is set to <Auto>.
– It may show a different road name.
– It may not ask you to turn at a junction even if
you need to.
– It may give guidance different from the actual
road conditions.
– It may give incorrect distance information.
Vehicle information
• The following items are displayed in <
(Function Menu)> - <Vehicle Info> - <Drive>.
(☞ page 49)
1
2
3
4
5
p
• The data shown on the screen are approximate
values for reference.
1 Direction of the car
2 Current speed

3 Maximum speed*

4 Average speed*
1
5 Distance you have traveled*
6 The street you are now on
1
1
7 The city you are now in
8 Latitude and longitude of your current position
9 Altitude of your current position
p Date/Local time
1
* Press [Reset] to clear the record.
• The following items are displayed in <
(Function Menu)> - <Vehicle Info> -
<System>. (☞ page 49)
q
w
e
r
q Name of the unit
w Version of the software
e Version of the map database
r Version of the voice guidance database
t Connection status of the ILLUMINATION
CONTROL lead
<On>: The illumination signal is detected.
y Connection status of the PARKING BRAKE lead
<On>: The parking brake is engaged.
u Connection status of the REVERSE GEAR
SIGNAL lead
<On>: Reverse gear signal is detected.
i Number of the GPS satellites being utilized/
Number of all the available GPS satellites
6 o Status of the gyroscope
; Speed pulse rate
7
a Status of calibration
8
<Processing>: The current position cannot
9
be determined without data from GPS
satellites.
<Leaning>: The current position can be
determined even when the System cannot
receive data from GPS satellites.
<Learned>: The current position can be
determined accurately even when the System
cannot receive data from GPS satellites.
<Invalid>: Calibration is invalid.*
2
* Check the installation and connection of the
system if <Invalid> appears.
54
t
y
u
i
o
;
a
2