Selecting The Monitor System (Pal/Ntsc) - JVC KV-M70 Bedienungsanleitung

Selecting the Monitor System (PAL/NTSC)

(The monitor system is set to the PAL mode at the time of shipment from the factory.)
Set the Monitor System to view the input source of a different imaging system.
/
FULL
NORMAL VIDEO 1
MODE
AUTOMATIC DIMMER
DIMMER MODE
PAL / NTSC MODE
END
UP / DOWN MENU
MENU
AUTOMATIC DIMMER
DIMMER MODE
PAL / NTSC MODE
END
UP / DOWN
MENU
→
MODE ASPECT MENU
Press the MODE button, and the select the input source of
VIDEO 2
the image that you want to view.
Press the MENU button for less than 2 seconds.
Note:
• When END is selected, the system returns to the initial screen.
SELECT
Select PAL/NTSC MODE and Press MENU button.
SELECT
MENU
17