Troubleshooting - Scheppach Ab1600 Originalbetriebsanleitung

- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- Further supplementary take-back conditions of
the manufacturers and distributors can be ob-
tained from the respective customer service.

19. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Engine does not start
Motor not supplying pow-
er, fuse tripping
28 | GB
Possible cause
Mains fuse blown
Extension lead defective
Connection to the motor or switch not
OK
Engine or switch faulty
Cross section of the extension cable
insufficient
Overload
www.scheppach.com
• If the manufacturer delivers a new electrical device
to a private household, the manufacturer can ar-
range for the free collection of the old electrical de-
vice upon request from the end user. Please contact
the manufacturer's customer service for this.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. In countries outside the European Un-
ion, different regulations may apply to the disposal of
waste electrical and electronic equipment.
Remedy
Check mains fuse
Replace extension lead
Have this checked by an electrician
Have this checked by an electrician
see Electrical connection
Check tool