Hilti PD 5 Bedienungsanleitung Seite 26

6 Care, transport and storage
6.1 Cleaning
▶ Do not touch the lens with the fingers.
▶ Clean the lens by blowing the dust off or by wiping with a clean, dry cloth.
▶ Do not use liquids other than pure alcohol or water.
6.2 Transport
Note
The batteries must be insulated or removed from the product before it
is shipped or sent by mail.
▶ Use the Hilti packaging or packaging of equivalent quality for transporting
or shipping your equipment.
6.3 Storage and drying
▶ Do not put the product into storage when wet. Allow it to dry before
putting it away.
▶ Observe the temperature limits given in the Technical Data section which
are applicable to storage or transport of the equipment.
▶ Check the accuracy of the equipment before it is used after a long period
of storage or transportation.
7 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following conse-
quences: The burning of plastic components generates toxic fumes
which may present a health hazard. Batteries may explode if dam-
aged or exposed to very high temperatures, causing poisoning,
burns, acid burns or environmental pollution. Careless disposal may
permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of
the environment.
Most of the materials from which Hilti products are manufactured can
be recycled. The materials must be correctly separated before they can be
recycled. In many countries, your old tools, machines or appliances can be
returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
In accordance with the European Directive on waste electrical and electronic
equipment and its implementation in conformance with national law, electric
22