Parkside HG11783A Kurzanleitung

1. Insert the packing tape roll onto the
dispenser wheel (on the top-right of the
product). Position the packing tape roll
so that it will unwind with the sticky side
facing down as the product is pulled
backwards.
2. Pull the front end of the packing tape roll
through the slot between the dispenser
wheel and the metal guide. The metal
guide can be held open by pressing
down the metal tab. The sticky side of
the packing tape should face down.
3. Adjust the tension (clockwise) on the
dispenser wheel to set a smooth and
comfortable unwind mechanism. Open
the protective cover by rolling up the
indicator until you hear a "Tac" sound.
Then start packing.
CAUTION: Do not cut yourself on the
sharp blade.
4. Pull up the packing tape over the
cutting bar/blade. Press the packing
tape against a box and pull the product
towards the back. Make sure the
packing tape unwinds and adheres
correctly to the box.
5. Close the protective cover by rolling
down the indicator until the cover is fully
closed.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
˜ Warranty
The product has been manufactured to
strict quality guidelines and meticulously
examined before delivery. In the event of
material or manufacturing defects you
have legal rights against the retailer of this
product. Your legal rights are not limited in
any way by our warranty detailed below.
The warranty for this product is 3 years
from the date of purchase. The warranty
period begins on the date of purchase. Keep
the original sales receipt in a safe location
as this document is required as proof of
purchase.
Any damage or defects already present
at the time of purchase must be reported
without delay after unpacking the product.
Should the product show any fault in
materials or manufacture within 3 years
from the date of purchase, we will repair or
replace it – at our choice – free of charge to
you. The warranty period is not extended as
a result of a claim being granted. This also
applies to replaced and repaired parts.
This warranty becomes void if the product
has been damaged, or used or maintained
improperly.
The warranty covers material or
manufacturing defects. This warranty does
not cover product parts subject to normal
wear and tear, thus considered consumables
(e.g. batteries, rechargeable batteries, tubes,
cartridges), nor damage to fragile parts, e.g.
switches or glass parts.
Warranty claim procedure
So that your request can be processed
quickly, please observe the following
instructions:
For all inquiries, please have the receipt and
item number (e.g., IAN 484693_2501) ready
as proof of purchase.
The article number can be taken from the
identification label on the product, engraving
on the product, the front cover of your
manual (at the bottom left), or the sticker on
the back or bottom of the product.
If malfunctions or other defects arise, first
contact the service department indicated
below by phone or email.
You can then send a product recorded as
defective to the communicated service
address postage-free, making sure to
enclose proof of purchase (receipt) and
information on the details of the defect and
when it occurred.
You can download and view this and
numerous other manuals at parkside-diy.
com. This QR code takes you directly to
parkside-diy.com. Choose your country
and use the search screen to search for the
operating instructions. Entering the item
number (IAN) 484693_2501 takes you to the
operating instructions for your item.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk