Parkside PAMT 20-Li A1 Originalbetriebsanleitung Seite 10

GB CY
Never replace the non-
•
metallic cutting unit with
a metallic cutting unit.
Avoid an abnormal body
•
posture. Ensure secure
footing at all times to
maintain balance when
working on slopes.
Go slowly. Do not walk
•
with the device in your
hand.
Keep the connection and/
•
or extension cable away
from dangerous mov-
ing parts in order to pre-
vent damage to cables
that could lead to contact
with live parts.
Make sure to keep the
•
ventilation openings free
of foreign objects.
Switch off the device and
•
remove the battery. Make
sure that all moving parts
have come to a complete
stop
when leaving the
•
device,
before removing ob-
•
structions or loosening
blockages,
before checking the
•
device, cleaning it or
performing mainten-
ance work on it.
10
After contact with a for-
•
eign object,
if the machine begins
•
to vibrate in an unusual
way.
If the device starts to
•
vibrate abnormally, an
immediate check is re-
quired, remove the bat-
tery and:
examine for loose parts
•
and tighten these,
search for signs of
•
damage,
replace damaged parts.
•
contact the service
centre.
If an accident or mal-
•
function occurs during
operation, switch off
the device immediately.
Injuries must be prop-
erly treated or medic-
al assistance sought.
Read the "Troubleshoot-
ing" section to correct
any malfunctions or con-
tact our Service Centre.
Only use accessor-
•
ies recommended by
PARKSIDE. Unsuitable
accessories may cause
electric shock or fire.