Detecting Sensors; Detecting Rts End-Products; Configuring "My Settings; Configuring "My Location - SOMFY TaHoma Installationsanleitung

• Receive a security key. In an existing installation, this enables TaHoma
system to control all the io-homecontrol
- Follow the instructions that appear on the screen to manage the io-homecontrol

8.4. detecting sensors

- Once the io-homecontrol
• If the installation includes sensors, click the "sensor" tab.
• If not, go directly to the Detecting RTS end-products section.
- Follow the instructions that appear on the screen to detect all the sensors in the installation.
- If the installation does not include any RTS end-products, click the "my house" tab and go to the
Configuring "my house" section.

8.5. detecting Rts end-products

If the installation includes RTS end-products, click on the "RTS devices" tab:
- Follow the instructions that appear on the screen to detect all of the RTS end-products in the
installation.

9. Configuring "my SEttingS"

9.1. Configuring "my location"

The twilight function is used to programme the triggering of scenarios depending on the time of sunrise
and/or sunset.
When a day is programmed, dawn and twilight appear on
the timescale graphic and the scenarios can be associated
with them directly.
Settings can be made for this function in accordance with the following criteria:
• by entering sunset times at the solstices,
• by entering the geographical coordinates of the house,
• or by selecting a preset city.
- Click the "MY SETTINGS" menu and on the "my location" tab to access the configuration window.
- Check the sunrise and sunset time calculation mode and enter the relevant information.
- Click on "time shift" to manually adjust the sunrise and/or sunset times.
- Click the bottom menu bar to return to the installation's home menu.

9.2. Configuring "my house"

- In the "MY SETTINGS" menu, click the "my house" tab to configure the house and distribute the
end-products by room and by floor.
9.2.1. Configuring floors and outside areas
To configure the house, you must first define the various
floors and outside areas:
• Click the elements to select them.
• Click them again to remove them.
• Once you have selected the floors and outside areas in
the installation, click the "next" button.
Copyright © 2010-2012 Somfy SAS. All rights reserved.
devices in the house.
®
end-products have been detected:
®
TaHoma
to be integrated into a
®
system.
®
®
7