Back; Commissioning; Activating The Tahoma ® Unit; Installing The Tahoma ® Unit - SOMFY TaHoma Installationsanleitung

TaHoma
®
This indication can also be seen on the TaHoma
interface:
f Led showing Internet connection status:
• Green Led: connection established.
• Red Led: connection error (firewall settings, incorrectly connected Ethernet cable, etc.).
• Led off: the TaHoma
• LED flashing: an initialisation sequence is in progress.
The indicator on the TaHoma
a connection has not been established:

5.2. Back

USB port for connection of add-on modules to make
g
TaHoma compatible with other protocols (*).
®
h Ethernet port
Outlet for mains adapter
i

6. CoMMIssIonInG

6.1. activating the taHoma
The TaHoma unit can be activated beforehand or at the end user's home.
®
The installer must log into the Somfy professional web site for the country of installation and follow
the set up procedure:
• France: www.somfypro.fr
• Germany: www.somfynetz.de
• Austria: www.somfynetz.at
• Belgium: www.somfypro.be
• Netherlands: www.somfypro.nl
The installer must first note down the end user's information (surname, first name, full address, email
address, telephone number, etc.) required to create a user account.
6.2. Installing the taHoma
1) Connect the TaHoma
the Ethernet cable supplied.
Position the TaHoma
ADSL modem.
To improve the radio range, we recommend that the
TaHoma unit be placed in a vertical position, in an
®
unconfined place in the middle of the house (avoid
metallic surfaces and enclosures).
4
unit is not connected to the mains.
®
interface shows that
®
unit
®
unit
®
unit to the ADSL modem using
®
unit at least 30 cm away from the
®
®
• Denmark: www.somfynordic.dk
• Finland: www.somfynordic.fi
• Norway: www.somfynordic.com
• Sweden: www.somfynordic.se
1
Copyright © 2010-2012 Somfy SAS. All rights reserved.
g
h
i
Broadband
modem
> 30 cm