Configuring The Installation; Detecting The Installation; Detecting Io-Homecontrol ® End-Products; Managing The Io-Homecontrol - SOMFY TaHoma Installationsanleitung

TaHoma
®
- Click the "MY WEEK" icon to programme one or more
days or view existing programmes and incorporate them
into a week, or to activate/deactivate automatic mode.
- Click the "MY SENSORS" icon to adjust the sensor
thresholds and define the associated scenarios, or to
activate/deactivate automatic mode.

8. ConfIGURInG tHe InstaLLatIon

8.1. detecting the installation

- Connect to the Somfy professional web site for your
country and log in.
- To configure the installation, click "CONFIGURATION" in
the bottom menu bar.
- Click the "installation" tab and select the "io devices"
or "RTS devices" tab depending on which type of
end-product the installation contains.
8.2. detecting io-homecontrol
You will need a two-way io-homecontrol
Examples of two-way io-homecontrol
• Telis 1 io
• Telis Composio io
• Impresario Chronis io
• Easy Sun io
• Keytis io.
• KLR and KRX Velux
To find the KEY button on the remote control, please refer to the relevant instructions.
There must only be one io-homecontrol
- Follow the instructions that appear on the screen to detect all of the io-homecontrol
in the installation.

8.3. Managing the io-homecontrol

It is possible to manage the io-homecontrol
"io system" tab.
This tab is password-protected. the password is instal.
Via the "io system" tab, TaHoma
• Give the installation's security key to a remote control. When a new remote control with feedback
function is added, the installation's security key must be sent to it.
• Generate a security key. If the remote control has been mislaid, this function can be used to
change the security key for the house.
6
end-products
®
remote control to perform the following steps.
®
remote controls:
®
, etc.
®
key for the entire installation.
®
system
®
system in the "CONFIGURATION" menu, using the
®
can:
®
Copyright © 2010-2012 Somfy SAS. All rights reserved.
end-products
®