Bosch PSB 1080 LI-2 Originalbetriebsanleitung Seite 24

OBJ_BUCH-2178-002.book Page 24 Wednesday, March 19, 2014 2:25 PM
24 | English
 Prevent dust accumulation at the workplace. Dusts can easily ignite.
 The battery is supplied partially charged. To ensure full battery ca-
pacity, completely charge the battery before using for the first time.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is switched off. Rotat-
ing tool inserts can slip off.
 Adjust the gear switch only when the machine is at a complete stop.
 If the gear switch cannot be pushed to the stop, turn the drill chuck a
little.
 The battery charge-control indicator indicates the charge condition
of the battery for a few seconds when the On/Off switch is pressed
half or fully through. It consists of a two-colour illuminating LED.
LED
Continuous lighting, green
Continuous lighting, red
Flashing light, red
 To save energy, only switch the power tool on when using it.
Symbols
The following symbols are important for reading and understanding the op-
erating instructions. Please take note of the symbols and their meaning. The
correct interpretation of the symbols will help you to use the machine in a
better and safer manner.
Symbol
2 609 007 735 | (19.3.14)
Capacity
≥ 30%
< 30%
< 11%
Meaning
PSB 1080 LI-2/PSR 10,8 LI-2:
Combination Cordless Drill/
Cordless Drill Driver
Grey-marked area: Handle (insulated gripping
surface)
Bosch Power Tools