Parkside PERT 550 C6 Bedienungsanleitung Und Originalbetriebsanleitung Seite 34

Keep the extension cord away from
dangerous moving parts to prevent
damages to cords that can lead to
contact with live parts.
If the mains cord gets damaged
or becomes tangled during use,
immediately switch o the product
and unplug the mains cord to
disconnect the product from the
mains supply.
Use a residual current device (RCD)
with a tripping current of not more
than 30 mA.
Do not use any accessories that are
not recommended by Parkside. This
can result in electric shock or fire.
Always disconnect the product from
the mains supply (i.e. disconnect the
plug from the mains)
– whenever the product is left
unattended;
– before clearing a blockage;
– before checking, cleaning or using
the product;
– after striking a foreign object;
– whenever the product starts
vibrating abnormally.
If the product starts to vibrate
abnormally, an immediate check
must be carried out.
– Search for signs of damage.
– Perform any necessary repairs to
damaged parts.
– Examine for loose parts and
tighten these.
Always ensure that the ventilation
openings are kept free of foreign
objects.
Maintenance and storage
Disconnect the product from the
mains supply (i.e. disconnect the
plug from the mains) before carrying
out maintenance or cleaning work.
Use only spare parts and accessories
supplied and recommended by the
manufacturer.
34 GB/IE/NI/CY/MT
Regularly check and maintain the
product. Have the product repaired
in a licensed workshop only.
When not in use, store the product
out of the reach of children.
Make sure that the air vents are free
of dirt.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and
low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Use correct accessory tools for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
Behaviour in emergency situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.