Parkside PERT 550 C6 Bedienungsanleitung Und Originalbetriebsanleitung Seite 32

2) Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
3) Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
5) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that ma affect the
power tool's operation.
If damaged, have the power
tool repaired be ore use. Many
accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool
for operations di erent from those
intended could result in a hazardous
situation.
32 GB/IE/NI/CY/MT
8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow
for safe handling and control of the
tool in unexpected situations.
Service
1) Have your power tool serviced by
a qualified repair person using onl
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Additional safety instructions
Training
The product is not suitable for use
by children. Children should be
supervised to ensure that they do not
play with the product. Cleaning and
user maintenance shall not be made
by children.
This product is not intended for use
by persons with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge.
Never let children or persons who
are not familiar with the instructions
mentioned use the product.
Local regulations or by-laws may
determine the minimum age for using
the product.
The operator or user is responsible
for accidents or damage to other
people or their property.
Read the user manual carefully. Be
familiar with the controls and the
correct use of the machine.
The product must not be used at
altitudes higher than 2,000 m.
Preparation
Before each use, carry out an
inspection on damaged, missing or
wrongly mounted protective devices
or parts of the cutting device.