Ce Conformity; Disposal; Maintenance; Recommended Accessories - ECM C-MANUALE 54 Bedienungsanleitung

Problem
The grinder motor produces a
humming sound, does not operate,
does not grind any beans.
Grind cannot be adjusted.
8

CE CONFORMITY

Conformity
This product complies with the following directives:
IEC 60335-1 (ed. 5)+A1,
IEC 60335-2-64:2008 (ed.3) + A1,
EN55014-1:2006 + A1:2009 + A2: 2011
EN55014-2:1997 + A1:2001 + A2: 2008
EN61000-3-2:2006 + A1:2009 + A2: 2009
EN61000-3-3:2013
9

DISPOSAL

WEEE Reg. No.: DE69510123
This product complies with EU Directive 2002/96/CE and is registered according to WEEE (Waste Electrical and
Electronic Equipment).

10 MAINTENANCE

Any repairs or changes of single components must be carried out by an authorised specialty dealer.
If your burrs have to be replaced (usually after grinding 250 kg of coffee), please also contact your authorised
specialty dealer.

11 RECOMMENDED ACCESSORIES

For a perfect coffee result a good espresso coffee machine and coffee grinder are as important as a good coffee. Our
professional espresso coffee machines are the best basis to achieve this result.
Tamper and tamping station are recommended to assure constant pressure on the coffee grounds.
The coffee knock box perfectly complements your espresso coffee machine and your grinder.
Mechanika V Slim
Bedienungsanleitung/ User Manual C-Manuale 54
Possible Cause
The grind is too fine: The grinding
burrs touch and mutually block each
other.
The coffee shaft is blocked with
coffee powder. The coffee blocks the
motor.
Thread is blocked with coffee.
EN 60335-1:2012
EN 60335-2-64:2000+A1:2002
EN 62233:2008
Knock box (round)
16
Troubleshooting
Adjust the grind to a coarser degree.
Clean coffee shaft, adjust the grind
to a coarser degree.
Clean the thread.
Tamper, convex or flat
ENGLISH