Adjusting The Grind - ECM C-MANUALE 54 Bedienungsanleitung

Now start operating your coffee grinder:
Attach the bean hopper.
First, be sure not press the bean hopper entirely down
so the lock slide is within easy reach.
Fill the bean hopper with roasted coffee/espresso
beans.
Open the lock slide.
Push the bean hopper further down into the correct
position.
Plug the electrical cord into an outlet and switch the
grinder on. The grinder is now operational.
Important: Never fill the bean hopper with already ground coffee. Never place a finger or other items into the coffee
bean chute, nor the ground coffee spout funnel.
Emergency Stop Operation:
The grinder may be stopped immediately by activating the On/Off switch

4.2 Adjusting the grind

The grinding degree is preset. You can change the grind to achieve an optimum grinding which fulfils your needs. The
grinding degree can be modified as follows:
1. Switch on the grinder by operating the power switch.
2. Press the contact spring with the filter holder
3. Unlock the grinding scale by pushing the adjustment clip on the left side of the grinder.
 You can achieve a finer grind by turning the scale clockwise.
 You can achieve a coarser grind by turning the scale counter-clockwise.
Grinding degree (Stepwise adjustment):
 When adjusting, we suggest to increase or decrease in few steps at a time until achieving the
desired grind.
 The coffee reacts differently on the effects of weather. Choose a fine grinding degree in dry weather
and a coarse grinding degree in humid weather.
Bedienungsanleitung/ User Manual C-Manuale 54
finer
13
ENGLISH
coarser