Emptying The Fluid Container Manually - Kärcher IVR-L 100/24-2 Originalbetriebsanleitung

Check the fill level display
Note: The red marking on the drain hose
shows the maximum admissible filling lev-
el.
Draining the fluid container by
means of drum pump
Illustration
 Secure the disposal hose in the support
when it is not used.
Emptying during vacuuming operation
 Connect the disposal hose to the dis-
posal unit.
 Plug in the mains plug of the drum
pump.
 Start vacuuming operation.
 Use the On/Off switch to switch on the
drum pump.
 Adjust the delivery rate by means of the
+/- button.
Note: Choose the delivery rate according
to the vacuumed quantity. Prevent the
drum pump from running dry. Do not leave
the drum pump unattended.
Emptying after the vacuuming
operation
 Switch off the appliance and remove
the plug from the socket.
 Drive the appliance to the disposal site
for the liquid.
 Connect the disposal hose to the dis-
posal unit.
 Plug in the mains plug of the drum
pump.
 Use the On/Off switch to switch on the
drum pump.
14
 Adjust the delivery rate by means of the
+/- button.
Note: Prevent the drum pump from running
dry. Do not leave the drum pump unattend-
ed.
Emptying the fluid container
 Switch off the appliance and remove
the plug from the socket.
 Drive the appliance to the disposal site
for the liquid.
 Disconnect the drain hose at the upper
hose coupling.
 Hold the drain hose over a suitable col-
lection unit and drain the content.
 Dispose of the contents according to
the local provisions.
Tilting the container
Illustration on the inside of the front
cover
 Switch off the appliance and remove
the plug from the socket.
 Drive the appliance to the disposal site
for the liquid.
Illustration
 Open the lock of the suction head.
 Remove the suction head and put
aside.
Illustration
 Remove the drum pump from the stand-
pipe.
Illustration
 Open the lock.
 Foot rest with IVR-L 100/24-2 Tc Me Dp
 Lateral lever with IVR-L 120/24-2 Tc Me
Dp
Illustration
 Tilt the container with the push handle.
 Dispose of the contents according to
the local provisions.
 Fit and lock the suction head again.
 Reinsert the drum pump.
– 4
EN
manually