Technical Data; Before Starting The Equipment - EINHELL GC-RT 7530 Originalbetriebsanleitung

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Voltage ............................................230V ~ 50Hz
Power input ............................................... 750 W
Working width ............................................30 cm
Hoe diameter .............................................22 cm
Idle speed .............................................. 400 rpm
Number of blades .................................. 4 pieces
Danger!
Sound and vibration
L sound pressure level ..................... 78.4 dB(A)
pA
K uncertainty .......................................... 2.5 dB
pA
L sound power level ..................... 91.93 dB(A)
WA
K uncertainty ........................................ 1.37 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_GC_RT_7530_SPK1.indb 17 Anl_GC_RT_7530_SPK1.indb 17
≤ 2.5 m/s
2
h
2
- 17 -
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
Assembly (Fig. 4-11)
•
Place the motor unit and the push bars on the
ground in order (Fig. 4).
•
Do not forget to slide the cable strain-relief
clamp (Fig. 6/Item 5) over the bottom push
bar.
•
Slide the bottom push bar on to the push bar
holder and secure the two components to
each other (Fig. 5).
•
Now secure the top push bar to the bottom
push bar (Fig. 6).
•
Install the 2-hand safety switch as shown in
Fig. 7-10.
•
Secure the cable using the supplied cable
securing clips (Fig. 11/7)
13.11.14 17:11 13.11.14 17:11