Klauke K502 Bedienungsanleutung Seite 15

Instruction manual K502
__________________________________________________________________________
Attention
Please use only clean, proper hydraulic oil.
(Shell Tellus T 15 and other hydraulic oils of similar quality)
Attention
Hydraulic oils can cause cutaneous eruption (eczema) or other health
hazards. Avoid long contact with the skin. Wash hands carefully after every
contact.
Attention
Spilled hydraulic oil must be absorbed immediately.
The following hydraulic oils with the viscosity class VG 15 and the quality level HLP are
suitable for a temperature range -20°C to +40°C:
AVIA HVI 15, Shell Tellus T 15, Mobil DTE 11, NUTO H 15, Rando HD - Z15,
Agip OSO 15, BP Energol HLP 15.
5.5. Reference as to which (spare-) parts can be exchanged by the customers
Within the determined use of the tool the customer may only change the oil and the
blades.
Attention
Do not damage the seals of the tool.
Do not attempt to repair the tool yourself, and do not remove any parts such as screws
and other components.
5.6. Storage and transport of the unit
In order to protect the pump unit against damages it has to be cleaned carefully after
heavy duty operations.
The hydraulic pump is supplied with a hook (Pos.-No. 2) to hold the pump lever down
for easier transportation. For the same purpose the cutting head is supplied with a
carrying handle (Pos.-No. 7). The hydraulic hose (Pos.-No. 8) is the most vulnerable part
of the pump and has to be handled with care. The minimum bending radius should not be
lower than 70 mm.
page 15