Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - SOLIS PRIMAROMA 1010 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
CL EANIN G A ND M A INT E NANC E
s
CL EANI NG THE ST EAM WAND
The steam wand should be cleaned after every time milk is steamed.
Proceed as follows:
1. The appliance has to be plugged in and switched on with the ON / OFF button,
the function button has to be pushed in and set to the steam position
2. Point the steam wand into the drip tray and turn the selector to the right to the
steam position
. Let steam escape for a few seconds: by doing so, you remove
potential milk remains in the steam wand.
3. Return the selector to the center to the standby position l. Press the function
button so that it is no longer pushed in. Switch the machine off with the ON / OFF
button and let the appliance cool down. Press the ON / OFF button for at least
3 seconds to switch the appliance off.
4. Wipe the outside of the steam wand clean with a damp cloth.
5. Should the steam wand be clogged up, stick a needle into the opening of the
nozzle.
6. Should the steam wand still be clogged up, you can unscrew the nozzle of the
wand.
7. First, place the nozzle in a glass with hot water, then try to remove the blocking
with a needle again. Screw the nozzle back on to the steam wand.
CLEANI NG THE FI L TER INSERT S,
T HE P ORTAFILTER AND THE BREWIN G GR OU P
Regularly let hot water run through the brewing group with the portafilter inserted,
but empty. This will flush potential coffee powder remains from the brewing group.
Wash the portafilter and the filter inserts separately and by hand in warm dishwater
and rinse everything under running water. Dry well afterwards.
We recommend periodically cleaning the portafilter and the filter inserts with
SOLITABS to remove coffee grease and other residues (approx. every month, at least
after 250 cups). For the exact process, please refer to the instructions included with
SOLITABS.
82
CL E A N IN G T H E C A S I NG A N D T HE C UP SHE LF
Before the casing is cleaned, the appliance should be switched off and un-
plugged.
Clean the casing and the cup shelf with a soft, damp cloth, then dry it with a dry
cloth.
In general, do not use any abrasive or aggressive cleaning agents, rough
sponges or cloths, as they might scratch the surface.
.
CL E A N IN G T H E D R I P TR AY W I T H DR I P G RI D
Before cleaning the drip tray, the appliance should be switched off and un-
plugged.
Remove, empty and clean the drip tray with drip grid regularly and every time it is full.
Remove the drip grid and pull the drip tray out to the front. Hand wash the drip tray
and the drip grid with warm dish water. Do not use any aggressive cleaning agents
or scouring sponges. Rinse the tray and the grid with clear water and carefully dry
both parts.
CAUTION: Drip tray and drip grid are not dishwasher safe.
Reinsert the drip tray and place the grid back on the drip tray.
S T O RIN G T H E SO LI S P R I M A RO M A
Turn the selector to the center standby position l and switch the appliance off
with the ON / OFF button (press for at least 3 seconds). Pull the power plug from the
socket. Store away all accessory parts.
Store the cooled down, cleaned and dry machine in an upright position, ideally in
the original packaging. Do not place any items on the appliance.
83

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cm4682e-gs1010Primaroma typ 1010

Inhaltsverzeichnis