Instructions For Disposal; Inserting (Replacing) Batteries - eQ-3 MAX! Eco Bedienungsanleitung

Do not dispose of the device with regular domestic waste.
Electronic equipment must be disposed of at
local collection points for waste electronic equip-
ment in compliance with the Waste Electrical and
Electronic Equipment Directive.
The CE Marking is simply an official symbol
relating to the free movement of a product; it does
not warrant a product's characteristics.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.

5. Inserting (replacing) batteries

1. As-delivered condition
When you are starting up the device for the first time, first
remove the mounting plate (A) on the rear of the button.
• To do this, hold the MAX! Eco switch firmly in one hand
and pull off the installation plate at one corner.
2. Installed condition
Once mounted, the MAX! Eco switch can easily be pulled
out of the frame.
• Pull the button off the wall together with the frame by
pulling sideways at the frame. You do not need to remo-
ve the rocker or open the device.
Change batteries
• Turn the electronic unit over to remove or insert the bat-
teries according to the illustration. After removing the old
batteries, please wait approx. 60 seconds before inser-
16

4. Instructions for disposal