Intended Use - eQ-3 MAX! Eco Bedienungsanleitung

The MAX! Eco switch makes it possible to switch all rooms
to manual mode and reduction temperature with a single
button press when you leave the house or the apartment.
When you enter the house or apartment again, you can
also set all rooms back to auto mode by pressing a button.
The individually set weekly programmes for the rooms are
then executed. Communication between MAX! Compo-
nents is bi-directional. This ensures that the information
sent reaches the recipient.
The MAX! Eco switch is battery-operated. As such it is
highly flexible where mounting and selecting a mounting
location are concerned. The MAX! Eco switch is mounted
and removed very easily using screws or adhesive strips.
It is compatible with a number of different surfaces includ-
ing furniture, brick walls, tiles or glass. Holes or slits do not
have to be chiselled out of brick walls. For the operation, a
flush-mounting box is not necessary. The frame supplied
with the device can be used for wall mounting. It is also
possible to integrate the MAX! Eco switch into existing
switches (see section 10 for more detailed information).
The device may only be operated indoors and must
be protected from the effects of damp and dust, as
well as solar or heat radiation. Using this device for
any purpose other than that described in this oper-
ating manual does not fall within the scope of in-
tended use and shall invalidate any warranty or lia-
bility. This also applies to any conversion or modifi-
cation work. This device is intended for private use
only.
14

1. Intended use