Adjusting The Finger Plate - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Instructions For Use

7.2. Adjusting the finger plate

The finger plate can be adjusted in 15° increments.
Loosen the pad below the palm of your hand.
1
2 Remove the pad.
Pull the two elements of the palm rest apart.
3
4 Move the finger plate into the desired position and position the locking pin.
5 Move the pad below the palm of your hand.
1 1
4 4
Please note that there are slots under the pad that
can be used for finger fixing.
2 2
5 5
3 3
www.albrechtgmbh.com 77