Adjust Or Change The Position Of The Redression Range On The Cds®Joints - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Individual
Instructions For Use
2.5.1. Adjust or change the position of
the redression range on the CDS
1 Remove the two black countersunk screws.
2 You can adjust the position of the redression range in 15° increments.
Replace and tighten the countersunk screws again.
3
1 1
2 2
60 00800 03032900 – INTERNATIONAL SERVICE HOTLINE
Joints
®
1 1
3 3