Spring Tension; Activating The Spring Tension; De-Activating The Spring Tension - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Individual
Instructions For Use

2.4. Spring tension

2.4.1. Activating the spring tension

To activate the spring tension, set the switch to "on".
1
2 Move the joint to Extension or Flexion against the desired direction of action of the spring
force until you feel a slight resistance. Overcome this to activate the spring force.
1 1

2.4.2. De-activating the spring tension

Before putting on or taking off the brace, you must deactivate the spring tension.
Set the switch to "off".
1
2 Move the joint to Extension or Flexion against the desired direction of action of the spring
force. This movement adjusts the position of the activation mechanism. The patient can
reactivate the spring force in this position. (See 2.4.1)
1 1
Activating or deactivating the spring tension does not change the strength of the spring tension.
56 00800 03032900 – INTERNATIONAL SERVICE HOTLINE
1 1
1 1
2 2
2 2