Immobilise; Install The Cover - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Individual
Instructions For Use

5.4. Immobilise

To immobilise the brace, first adjust the extension stop. Move the support
against the extension stop and then position the flexion stop on the support.

5.5. Install the cover

Make sure that both stop pins of the joint are in the pin slots.
Replace the cover and rotate it 90° to the detent point. The joint cover must
1
always be closed after adjustment to secure the stop pins.
1 1
72 00800 03032900 – INTERNATIONAL SERVICE HOTLINE
1 1